RESEARCH

Welcome!! Research @ Rit

Research Publications

Computer Science and Engineering

Journal Publications

Akhila S Ajayan, Raj Kumar T, Dr.Sobhana N V ” Data Analysis Tools And Technologies For Mobile Forensics-A Review” , Journal of Huazhong University of Science and Technology,Vol.50, May 2021

Luping Zhang, Fei Xu, Ajeesh Ramanujan, and K.G. Subramanian. Control languages accepted by labeled spiking neural P systems with rules on synapses. Theoretical Computer Science, (2021); https://doi.org/10.1016/j.tcs.2021.06.027

Raj Kumar T, R. Reshma Ramesh, Dr.Sobhana N V” Identification Of Insider Threat In A Cloud-Based System- A Review” Journal of Emerging Technologies and Innovative Research,Vol.8,Issue5,May 2021

Chilankamol Sunny & Shibu Kumar K. B (2021) Refined PSO Clustering for Not Well-Separated Data, Journal of Experimental & Theoretical Artificial Intelligence, pp. 1-17, DOI: 10.1080/0952813X.2021.1970238

Unnikrishnan K & Pramod K.V, 2021). Prediction-based robust blind reversible watermarking for relational databases. International Journal of Information and Computer Security. 14. 211. Doi:10.1504/IJICS.2021.10037246.

Jesmi Latheef , S.Vineetha “ Exploring Data Visualization to Analyze and Predict Customer Loyalty in Banking Sector with Ensemble Learning” ,International Journal of Innovative Research in Applied Sciences and Engineering (IJIRASE) Volume 4, Issue 9, DOI:10.29027/IJIRASE.v4.i7.2021.891-904,March 2021.

Book Chapter

Nahil Ahmed Hassan, Abhigith Neil Abraham, Ajeesh Ramanujan. Deep Learning Applications with Python in Advanced Deep Learning for Engineers and Scientists, 23-60, Springer.

Latheef J., Vineetha S. (2021) Predicting Customer Loyalty in Banking Sector with Mixed Ensemble Model and Hybrid Model. In: Satapathy S.C., Bhateja V., Favorskaya M.N., Adilakshmi T. (eds) Smart Computing Techniques and Applications. Smart Innovation, Systems and Technologies, vol 224. Springer, Singapore. https://doi.org/10.1007/978-981-16-1502-3_37

Conference Publications

C. A. Deepa, P. C. Reghu Raj, and and Ajeesh Ramanujan. Improving relation extraction beyond sentence boundaries using attention. AIP Conference Proceedings 2336(1), (2021); https://doi.org/10.1063/5.0046136

Ajeesh Ramanujan, and Varghese B.A. (2021) Internet Censorship Based on Bayes Learning Model. In: Palesi M., Trajkovic L., Jayakumari J., Jose J. (eds) Second International Conference on Networks and Advances in Computational Technologies. Transactions on Computational Science and Computational Intelligence. Springer, Cham. https://doi.org/10.1007/978-3-030-49500-8_5

Ajeesh Ramanujan, and Varghese B.A. (2021) A Survey on DDoS Prevention, Detection, and Traceback in Cloud. In: Palesi M., Trajkovic L., Jayakumari J., Jose J. (eds) Second International Conference on Networks and Advances in Computational Technologies. Transactions on Computational Science and Computational Intelligence. Springer, Cham. https://doi.org/10.1007/978-3-030-49500-8_7

Rajan V.M., and Ajeesh Ramanujan. (2021) Architecture of a Semantic WordCloud Visualization. In: Palesi M., Trajkovic L., Jayakumari J., Jose J. (eds) Second International Conference on Networks and Advances in Computational Technologies. Transactions on Computational Science and Computational Intelligence. Springer, Cham. https://doi.org/10.1007/978-3-030-49500-8_9

J. Latheef and S. Vineetha, "LSTM Model to Predict Customer Churn in Banking Sector with SMOTE Data Preprocessing," 2021 2nd International Conference on Advances in Computing, Communication, Embedded and Secure Systems (ACCESS), 2021, pp. 86-90, doi: 10.1109/ACCESS51619.2021.9563347.

Journal Publications

Rahul Raj, Roshna, P,Sobhana N V, Extractive Text Summarization In Malayalam With Self Organizing Map Clustering And Entity Recognition, Sadhana- Academy Proceedings in Engineering Sciences,2020

Conference Publications

C. A. Deepa, P. C. Reghu Raj, and Ajeesh Ramanujan. Relation Extraction across sentences using Bi-directional Long Short Term Memory Networks, 2020 International Conference on Emerging Trends in Information Technology and Engineering (ic-ETITE), 2020, pp. 1-6, doi: 10.1109/ic-ETITE47903.2020.174.

Sandhya, Sobhana N V,Shasidhar Koolagudi .Emotional Speaker Recognition using Spectral Features, Third International Conference on Advances in Electronics, Computers and Communications (ICAECC-2020),IEEE

Journal Publications

CA Deepa, PC ReghuRaj, and Ajeesh Ramanujan. Relation Extraction Using Deep Learning Methods-A Survey. ICTACT JOURNAL ON SOFT COMPUTING, 9(3), 1893-1902 (2019).

Ashlin Francis and Vineetha S “Image Based Weather and Temperature Analysis System”, International Journal of Engineering Applied Sciences and Technology, 2019 Vol. 4, Issue 2, ISSN No. 2455-2143, Pages 59-66

Conference Publications

Tintu Thomas, Sobhana N V, Shasidhar Koolagudi, Speaker Recognition in Emotional Environment using Excitation Features Third International Conference on Advances in Electronics, Computers and Communications (ICAECC-2020),IEEE

Sobhana N V, Aju Tom, Ontology based Place name disambiguation, WCSEM 2020 – 9th World Conference on Applied Sciences, Engineering, France, International Conference on Recent Innovations in Engineering and Technology,2020

Journal Publications

Atulya K. Nagar, Ajeesh Ramanujan, and K. G. Subramanian. Control words of string rewriting P systems. International Journal of Advances in Engineering Sciences and Applied Mathematics. volume 10, pages 230–235, (2018)

Conference Publications

Vincy Rajan, Sobhana N V, Machine Fault Diagnostics and Condition Monitoring Using Augmented Reality and IoT, ICICCS2018, International Conference On Intelligent Computing And Control Systems, IEEE

Sobhana N V, Optimized Path Selection in Oceanographic Environment,International Conference on Innovations in Bio-Inspired Computing and Applications (IBICA 2018) , Springer, Scopus

Blessy B, Sobhana N V,Sobha L, Malayalam to English Translation: A Statistical Approach, International Conference on Innovations in Bio-Inspired Computing and Applications 2018, Springer,Scopus

S. S. Thomas, S. A. Thomas, J. Paul and K. B. S. Kumar, "An Intelligent Adaptive Scheduler for Operating Systems Experimented Using FreeRTOS," 2018 Second International Conference on Intelligent Computing and Control Systems (ICICCS), 2018, pp. 1592-1597, doi: 10.1109/ICCONS.2018.8662927.

T. P. Shibla and K. B. Shibu Kumar, "Improving Efficiency of DBSCAN by Parallelizing kd-Tree Using Spark," 2018 Second International Conference on Intelligent Computing and Control Systems (ICICCS), 2018, pp. 1197-1203, doi: 10.1109/ICCONS.2018.8663169.

N. Prasad, K. Unnikrishnan and R. Jayakrishnan, "Fraud Detection by Facial Expression Analysis Using Intel RealSense and Augmented Reality," 2018 Second International Conference on Intelligent Computing and Control Systems (ICICCS), 2018, pp. 919-923, doi: 10.1109/ICCONS.2018.8663219.

Anugraha K R and Vineetha S “A Study On The Impact Of Machine Learning Tools For Detecting Anxiety Disorders In Preschool Children” IOP Conf. Series: Materials Science and Engineering 396 (2018) 012018 doi:10.1088/1757-899X/396/1/012018.

Journal Publications

K. Unnikrishnan & V, Pramod. (2017). Robust optimal position detection scheme for relational database watermarking through HOLPSOFA algorithm. Journal of Information Security and Applications. 35. 1-12. Doi:10.1016/j.jisa.2017.04.005.

Conference Publications

S. Syamili and A. Abraham, "Presentation slides generation from scientific papers using support vector regression," 2017 International Conference on Inventive Communication and Computational Technologies (ICICCT), 2017, pp. 286-291, doi: 10.1109/ICICCT.2017.7975205.

K. S. Aarathi and A. Abraham, "Vehicle color recognition using deep learning for hazy images," 2017 International Conference on Inventive Communication and Computational Technologies (ICICCT), 2017, pp. 335-339, doi: 10.1109/ICICCT.2017.7975215.

Journal Publications

Raj Kumar T , A. Sankara Narayanan, Sobhana N V “Forensic Analysis of Residual Artifacts from Private Browsing Sessions in Linux”, Advances in Intelligent Systems and Computing- Springer, Vol. 479, pp 39-49, 2016

Rani Oommen Paniker, Sobhana N V, An adoption model describing clinician’s acceptance of automated diagnostic system for tuberculosis, Health and Technology, Springer 2190- 7196,DOI 10.1007/s12553-016-0136-4, SJR, Scopus,2016

Unnikrishnan, K & Pramod, K. (2016). Dynamic prediction based watermarking for temporal relational databases. 1-6. Doi:10.1109/ICDSE.2016.7823956.

Anuradha P, Raj Kumar T, Sobhana N V “Recovering Deleted Browsing Artifacts From Web Browser Log Files In Linux Environment” IEEE International Symposium on Colossal Data Analysis and Networking(CDAN), 2016

Electronics and Communication Engineering

Journal Publications

Deekshitha G and Leena Mary, “Multilingual Broad Phoneme Recognition and Language-independent Spoken Term Detection for Low-resourced Languages,” Journal of King Saud University Computer and Information Sciences, Aug. 2021, doi: https://doi.org/10.1016/j.jksuci.2021.08.012 (SCIE)

Tomson Devis and Manju Manuel, “Hardware-efficient auto-reconfigurable hearing aids using 3-level octave interpolated filters for auditory compensation applications,” Physical and Engineering Sciences in Medicine, Springer, 44(3):785–798, 2021. (SCIE IF:1.43).

Jisha Anu Jose, C. Sathish Kumar, and S. Sureshkumar, “Tuna classification using super learner ensemble of region-based CNN-grouped 2D-LBP models”, Information Processing in Agriculture, Elsevier, 2021, ISSN: 2214-3173, DOI: 10.1016/j.inpa.2021.01.001. (SCOPUS)

Jisha Anu Jose, C. Sathish Kumar, and S. Sureshkumar, “A deep multi-resolution approach using learned complex wavelet transform for tuna classification”, Journal of King Saud University-Computer and Information Sciences, Elsevier, 2021, DOI:10.1016/j.jksuci.2021.03.004. (SCIE)

Jisha Anu Jose, C. Sathish Kumar and S. Sureshkumar, “Separation of commercially important tuna from other fishes using feature descriptor and pre-trained CNN models," European Journal of Nutrition & Food Safety, 2021, DOI: 10.9734/ejnfs/2021/v13i430411.

Tomson Devis and Manju Manuel,,”Design and Implementation of a Smart Cost-effective Hearing Aid using Fractional Interpolated Filters”, Journal of Information Science and Engineering(SCIE,Accepted for publication)

Sreehari R. and Leena Mary, Automatic Short Utterance Speaker Recognition using Stationary Wavelet Coefficients of Pitch Synchronised LP Residual, International Journal of Speech Technology, Springer (SCOPUS Indexed), Sep. 2021, DOI: 10.1007/s10772-021-09895-z

International Conferences

D. Abraham and M. Manuel, "Implementation of Sparse Ramanujan Sequence (SRS) based transforms in FPGA," 2021 International Conference on Communication, Control and Information Sciences (ICCISc), 2021, pp. 1-6, doi: 10.1109/ICCISc52257.2021.9484952.

Jisha Anu Jose, C. Sathish Kumar, and S. Sureshkumar, “An Ensemble of Region-Based CNN Models Combined By Sum Rule For Tuna Classification”, in Proceedings of IEEE International Conference on Communication, Control and Information Sciences (ICCISc-2021), Vol. 1, pp. 1-6, IEEE, Idukki, Kerala, 2021, DOI: 10.1109/ICCISc52257.2021.9484961.

Deepthy Mathew, C. Sathish Kumar, and K. Anita Cherian, “Application of discrete orthonormal Stockwell transform and local neighborhood patterns for leaf disease classification in banana”, in Proceedings of International Conference on Communication, Control and Information Sciences (ICCISc), Vol. 1, pp. 1-5, IEEE, Idukki, Kerala, 2021, DOI: 10.1109/ICCISc52257.2021.9484860.

A. CD, Nimmy Ann. Mathew, K. S. Riyas and Renu Jose, "Comparison Of Machine Learning Algorithms For Heart Rate Variability Based Driver Drowsiness Detection," 2021 2nd Global Conference for Advancement in Technology (GCAT), 2021, pp. 1-7, doi: 10.1109/GCAT52182.2021.9587733.

N. G, Vishnupriya Vijayan and Renu Jose, "Performance Analysis of Modulation Classification Using Machine learning," 2021 8th International Conference on Smart Computing and Communications (ICSCC), 2021, pp. 70-74, doi: 10.1109/ICSCC51209.2021.9528172.

Journal Publications

Tomson Devis and Manju Manuel, “A low-complexity 3-level filter bank design for effective restoration of audibility in digital hearing aids,” Biomedical Engineering Letters, 2020, pp. 1-9,10(4), 593-601,DOI10.1007/s13534-020-00167-4

Deepa Abraham,Manju Manuel, “Design of Transmultiplexer Filter Banks Using Ramanujan Sums”, National Academy Science Letters,February 2020, DOI 10.1007/s40009-020-00943-x(SCIE)

Jobin Varghese and C. Sathish Kumar, “Robust copy-move forgery detection algorithm using singular value decomposition and discrete orthonormal Stockwell transform”, Australian Journal of Forensic Sciences, 52(6), pp.711-727, 2020, DOI:10.1080/00450618.2019.1629018. (SCIE)

Jisha Anu Jose and C. Sathish Kumar, “Genus and Species-Level Classification of Wrasse Fishes Using Multi Domain Features and Extreme Learning Machine Classifier”, International Journal of Pattern Recognition and Artificial Intelligence, p. 2050028, 2020, DOI: 10.1142/S0218001420500287. (SCIE)

Deepthy Mathew, C. Sathish Kumar, and K. Anita Cherian, “Foliar fungal disease classification in banana plants using elliptical local binary pattern on multiresolution dual tree complex wavelet transform domain”, Information Processing in Agriculture, 2020, DOI: 10.1016/j.inpa.2020.11.002. (SCOPUS)

Abraham, D. and Manuel, M., “Signal periodicity detection using Ramanujan subspace projection”, Journal of Electrical Engineering, vol. 71, no. 5, pp. 326–332, 2020. doi:10.2478/jee-2020-0044. Imapct factor: 0.647

Deekshitha G and Leena Mary, “A Two-Stage Spoken Term Detection System for UnderResourced Languages”, IET Signal Processing, Vol. 14, Issue 9, pp. 602-613, Jul. 2020. (SCI/SCIE) DOI: 10.1049/iet-spr.2019.0131

Deekshitha G and Leena Mary, “Multilingual Spoken Term Detection: A Review,” International Journal of Speech Technology, Springer, Vol. 23, No. 3, DOI: 10.1007/ s10772-020- 09732-9, Jul. 2020. (SCOPUS Indexed).

Starlet Ben Alex, Ben P. Babu and Leena Mary (2020), Attention and Feature Selection for Automatic Speech Emotion Recognition Using Utterance and Syllable-Level Prosodic Features, Circuits, Systems and Signal Processing, Springer, vol, 1–29 (SCI Indexed).

International Conferences

Jisha Anu Jose, C. Sathish Kumar, and S. Sureshkumar, “Tuna classification using colour, structure, wavelet, and fuzzy based textural features”, in Proceedings of IEEE International Conference for Innovation in Technology (INOCON), pp. 1-5, IEEE,

D. Abraham and M. Manuel, "Image Transmultiplexing using Ramanujan Sums," 2020 12th International Conference on Computational Intelligence and Communication Networks (CICN), 2020, pp. 70-74, doi: 10.1109/CICN49253.2020.9242550

Journal Publications

Sreekumar G., Leena Mary and Unnikrishnan A, Beam-forming of broad-band QFM signals using generalized time-frequency transform, The Journal of Electronics, Taylor and Francis (SCI), DOI:10.1080/00207217.2019.1666307

Sreekumar G., Leena Mary and Unnikrishnan A, Performance Analysis of Fractional Fourier Domain Beam-Forming Methods for Sensor Arrays, SmartScience, Taylor & Francis (Scopus Indexed), vol. 7, no. 1, pp. 28 - 38, January 2019

Leena Mary and Deekshitha G., “Searching Speech Databases: Features, Techniques and Evaluation Measures”, Springer Briefs in Speech Technology, Springer Nature, Switzerland AG. DOI: 978-3-319-97761-4 (2019)

Tomson Devis and Manju Manuel, "AWSAR Awarded Popular Science Stories by Scientists for the People" with ISBN: 978-81-7480-337-5. The book is the compilation of AWSAR 2019 stories.

International Conferences

Nimmy George, Manju Manuel,"A Four Grade Brain Tumor Classification System Using Deep Neural Network," Second International Conference On Signal Processing and Communication, 2019, Karunya University, Coimbatore.

Anuja Prasad and Leena Mary, "A comparative study of different features for vehicle classification ", in 2019 International Conferences on Computational Intelligence in Data Science (ICCIDS),pp.1-5,IEEE,2019 Betty Kurian, V. R Sreehari and Leena Mary, “ PNCC for Forensic Speaker Recognition”, International Conference on Microelectronics, Signals & Systems (ICMSS), Kollam, Kerala, 2019.

Sangeetha S, Deekshitha G, Anu George and Leena Mary, “ Language Independent Broad Phoneme Classification”, IEEE Int. Conf. on Intelligent Computing, Instrumentation and Control Technologies (ICICICT), Kannur, Kerala, July. 2019, pp. 1-6.

Journal Publications

Tomson Devis and Manju Manuel, “Multirate and Filter bank Approaches in Digital Hearing Aid Design: A Review, ” IOP Conf. Series: Materials Science and Engineering, 396(1):1-8, 2018. (SCOPUS).

Sreekumar G., Leena Mary and Unnikrishnan A, Experimental verification of quadratic chirp detection using modified fractional Fourier transform, The Journal of Acoustical Society of India ((DRDO Refereed Journal), Vol. 45, No. 3, 2018 (pp. 141-149)

DOA Estimation of Broad-Banded Linear and Quadratic Chirps Using Nested and Co-Prime Arrays, International Journal of Computer Sciences and Engineering (UGC Refereed Journal), Vol.-6, Issue-7, July 2018, pp.49-57

Leena Mary, Extraction of Prosody for Automatic Speaker, Language, Emotion and Speech Recognition, Edition 2, Springer briefs in Speech Technology Springer, Netherlands, 2018, 978-3-319-91170-0

International Conferences

Starlet Ben Alex, Ben P. Babu and Leena Mary, Utterance and Syllable Level Prosodic Features for Automatic Emotion Recognition, International Conference on Recent Advances in Intelligent Computational Systems (RAICS), IEEE, (Xplore Digital Library), Thiruvananthapuram, Dec 2018.

G. Deekshitha, and L Mary, “Speech Signal Based Broad Phoneme Classification and Search Space Reduction for Spoken Term Detection,” TENCON 2018 - IEEE Region 10 Conference, Jeju, South Korea, pp. 1607-1612, Oct. 2018.

Deekshitha G, Hansa Hathoon K I, and Leena Mary, “A Novel Two-Stage System for Spotting Fricative and Plosive Regions from Continuous Speech,” in Proc. IEEE Int. Conf. on Commn. and Signal Processing (ICCSP), Chennai, India, pp. 0775-0779, Apr. 2018.

Tomson Devis and Manju Manuel, “A 17-Band Non-uniform Interpolated FIR Filter Bank for Digital Hearing Aid,” in Proc. IEEE International Conference on Communication and Signal Processing (ICCSP-18), Chennai, pp. 456-460, April 2018.

Deekshitha G., Sreelakshmi K R, Ben P Babu and Leena Mary, “Development of Spoken Story Database in Malayalam Language,” in Proc. IEEE Int. Conference on Electrical Energy Systems (ICEES-2018), Chennai, pp. 530-533, Feb. 2018.

Sreehari V. R. and Leena Mary , “Automatic Speaker Recognition using Stationary Wavelet Transform Coefficient of LP residual”, IEEE Region 10 International Conference TENCON, South Korea, Oct 2018, pp-1601-1606

Linta Antony, Sreekumar G., Leena Mary and Unnikrishnan A., “Novel Rank Enhancing Algorithm for 2D Sparse Arrays with Contiguous Coarrays”, 8th International Conference on Advances in Computing and Communication (ICACC-2018), Procedia Computer Science 143 (2018) 277–284.

Shinimol Salim, Deekshitha G., Anu George and Leena Mary, Automatic Spotting of Vowels, Nasals and Approximants from Continuous Speech, International Conference on Control, Communication and Computing (IC4), Trivandrim, July 2018.

Journal Publications

Leena Mary, Anil Antony, Ben P. Babu, Automatic Syllabification of Speech Signal using Vowel Onset Points and STE Valleys, International Journal of Speech Technology (IJST) Springer (Scopus indexed), 2017

International Conferences

Deekshitha G, Hansa Hathoon K I, & Leena Mary, “Automatic Spotting of Plosives and Fricatives from Speech signals”, International Conference on Research Trends in Engineering, Science & Technology (IER-RTEST’17), July 2017.

International Conferences

Deekshitha G and Leena Mary, “A Study on Audio Search Techniques,” in Proc. Int. Conference on Signal and Speech Processing (ICSSP’16), at TKM College of Engineering, Kollam, Kerala, pp. 267-271, Sep. 2016.

Journal Publications

Jubin James, Leena Mary, Real Time Phonetic Engine for Large Vocabulary Continuous Speech in Malayalam, IET Journal of Research (SCI Indexed), 2015

International Conferences

Deekshitha G, Jubin James Thennattil and Leena Mary, “Segmentation of Continuous Speech for Broad Phonetic Engine”, in Proc. IEEE Int. Conference on Electrical, Computer and Communication Technologies (ICECCT), Coimbatore, pp.1-5, Mar. 2015. doi:10.1109/ICECCT.2015.7226126.

Deekshitha G and Leena Mary, “Prosodically Guided Phonetic Engine”, 2015 IEEE International Conference on Signal Processing, Informatics, Communication and Energy Systems (SPICES), Kozhikode, pp. 1-5, Feb. 2015. doi: 0.1109/SPICES. 2015.7091457

Journal Publications

Deekshitha G and Leena Mary, “Broad Phoneme Classification Using Signal Based Features,” in International Journal on Soft Computing (IJSC), Vol. 5, No. 3, pp. 1-11, Nov. 2014. (Emerging SCI)

Deekshitha G, Jubin James Thennattil and Leena Mary, “Implementation of Automatic Segmentation of Speech Signal for Phonetic Engine in Malayalam” in International Journal of Engineering and Technical Research (IJETR), ISSN: 2321-0869, Vol. 2, Issue11, Nov. 2014. (Emerging SCI)

Journal Publications

Leena Mary, Anish Babu K. K. and Aju Joseph,Analysis and detection of mimicked speech based on prosodic features, International Journal of Speech Technology, Springer (Scopus indexed), Volume 15, Number 3 (2012), 407-417, DOI: 10.1007/s 10772-012-9163-3, Springer Netherlands 2012

Leena May, Extraction and representation of prosody for speaker, speech, and language recognition, Edition 1, Springer briefs in Speech Technology Springer, Netherlands, 2012, ISBN 978-1—4614-1158-1.

Journal Publications

Leena Mary, Prosodic features for speaker recognition, Book Chapter 13, Forensic Speaker Recognition-Law Enforcement and Counter-Terrorism, Springer-Verlag, New York, 2011, ISBN 978-1-4614-0263-3

Electrical and Electronics Engineering

Journal Publications

Thomas, T., Prince, A., Kumar, P.R.S. et al. Real-time hardware emulation of WECS based on DFIG during unbalanced type-B and type-E voltage dips for enhanced low voltage ride-through,” Electr Eng (2022). https://doi.org/10.1007/s00202-022-01577-6

International Conferences

P. K. Abraham, J. Namboodiry and D. Mary, "Experimental Validation of a Constant Torque Variable Deceleration Regenerative Braking System for a Brushless DC Motor," 2022 2nd International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control (PARC), 2022, pp. 1-6, doi: 10.1109/PARC52418.2022.9726650.

Journal Publications

International Conferences

Journal Publications

G. A. George, F. M. Chacko, A. Prince, and M. V. Jayan, “Integrated fuzzy-based modular cell balancing using mono circuitry for electric vehicle applications,” Electr. Eng., vol. 103, no. 1, pp. 153–165, 2021, doi: 10.1007/s00202-020-01068-6.

T. Thomas, P. Asok, A. Mattathil Radhakrishnan, and S. K. P. R. Puthenpurayil, “Real-time hardware emulation of wind turbine model with asynchronous generator under hardware-in-the-loop platform,” Int. J. Emerg. Electr. Power Syst., vol. 8410, pp. 1–14, 2021, doi: 10.1515/ijeeps-2021-0095.

J. Mathew, S.S. Beevi and G. Vincent, " Instantaneous Power Error Minimizing Algorithm for Peak Power Extraction from Partially Shaded PV Strings", Journal of Nuclear Energy Science & Power Generation Technology, 2021. [Accepted]

M. K. Kanthi and A. Dolly Mary, “Particle Swarm Optimization based Sliding Mode Controllers for Electric Vehicle Onboard Charger,” Computers and Electrical Engineering, 2021. [Accepted]

International Conferences

G. A. George, M. V Jayan, F. M. Chacko, and A. Prince, “Novel Single Balancing Circuitry for Modular Cell for Electric Vehicle Applications,” Proceedings of the Fourth International Conference on Microelectronics, Computing and Communication Systems. Springer, Singapore, vol. 673, pp 835-846, 2021, doi: 10.1007/978-981-15-5546-6_69.

M. K. Kanthi and A. Dolly Mary, “Performance Analysis of Sliding Mode-Controlled Bidirectional DC–DC Converter for Electric Vehicles,” Smart Sensors Measurements and Instrumentation. Lecture Notes in Electrical Engineering, vol 750. Springer, Singapore, vol. 750, pp. 335–349, 2021, doi: 10.1007/978-981-16-0336-5_28.

Ani Harish, Jayan M.V. , “Classification of Power Transmission Line Faults Using an Ensemble Feature Extraction and Classifier Method,” Inventive Communication and Computational Technologies. Lecture Notes in Networks and Systems, Springer, Singapore, vol 145, pp. 417–427, 2021, doi: 10.1007/978-981-15-7345-3_35.

A. Mohan, M. Khalid, and A. C. Binojkumar, “Performance Analysis of Permanent Magnet Synchronous Motor under DTC and Space Vector-based DTC schemes with MTPA control,” 2021 International Conference on Communication, Control and Information Sciences (ICCISc). IEEE, pp. 1–8, 2021, doi: 10.1109/iccisc52257.2021.9484869.

M. Khalid, A. Mohan, and B. A. C, “Evaluation and Validation of performance parameters of a Permanent Magnet Synchronous Motor drive system with Real-time simulator,” 2021 International Conference on Communication, Control and Information Sciences (ICCISc). IEEE, pp. 1–7, 2021, doi: 10.1109/iccisc52257.2021.9484895.

F. M. Chacko, M. V. Jayan, and A. Prince, “Voltage harmonics-based islanding detection for grid-tied photovoltaic systems,” in IEEE 2021 Fourth International Conference on Electrical, Computer and Communication Technologies (ICECCT), 2021. [Accepted]

Sreelekha V, P. Asok, “Comparative Study of WAMS Based Transmission Line Fault Detection and Protection Techniques,” in LNEE book series Recent Advances in Power Systems. Springer, 2021. [Accepted]

Peter K. Abraham, Jayan M.V. , “Ultracapacitor based constant torque regenerative braking system for a brushless DC motor ,” 2021 IEEE International Power and Renewable Energy Conference. IEEE, 2021. [Accepted]

Mohan, A., Khalid, M., Binojkumar, A.C. , An Investigation into the Applications of Real-Time Simulator in Experimental Validation of PMSM-Based Electric Drive System. In: Sengodan, T., Murugappan, M., Misra, S. (eds) Advances in Electrical and Computer Technologies. Lecture Notes in Electrical Engineering, vol 881. Springer, Singapore.

Book Chapter

T. Thomas, M. R. Anoopraj, P. Asok, and G. A. George, “An Introduction to Wind Energy Conversion System with Low Voltage Ride-Through Capability,” Advanced Aspects of Engineering Research, vol. 9, pp. 112–122, 2021, doi: 10.9734/bpi/aaer/v9/7779D.

Journal Publications

J. Mathew, S. Shanifa Beevi, and G. Vincent, “LabVIEW Based Fast Tracking MPPT Algorithm for PV Systems Using Voltage Sensor,” Mater. Today Proc., vol. 24, pp. 1816–1826, 2020, doi: 10.1016/j.matpr.2020.03.606.

S. Beevi, J. Mathew, and V. George, “A Novel High-Performance Instantaneous Resistance Mppt Algorithm for Pv Systems,” Int. J. Power Energy Syst., vol. 39, no. 4, pp. 208–215, 2020, doi: 10.2316/j.2019.203-0141.

S. Shanifa Beevi, J. Mathew, and G. Vincent, “A Novel High Performance Characteristic Resistance MPPT Algorithm for Photovoltaic Systems,” Mater. Today Proc., vol. 24, pp. 1827–1834, 2020, doi: 10.1016/j.matpr.2020.03.607.

B. K. Jose and G. Vincent, “Sequenced total cross tie configuration for photovoltaic array under partial shading conditions,” Int. J. Power Energy Syst., vol. 40, no. 1, pp. 9–17, 2020, doi: 10.2316/J.2020.203-0129.

F. M. Chacko, G. A. George, M. V. Jayan, and A. Prince, “Improved multifunctional controller for power quality enhancement in grid integrated solar photovoltaic systems,” World J. Eng., vol. 17, no. 4, pp. 585–598, 2020, doi: 10.1108/WJE-12-2019-0356.

T. Thomas and P. Asok, “Event analysis and real‐time validation of doubly fed induction generator‐based wind energy system with grid reactive power exchange under sub‐synchronous and super‐synchronous modes,” Eng. Reports, vol. 2, no. 12, pp. 1–21, 2020, doi: 10.1002/eng2.12282.

International Conferences

T. Thomas and P. Asok, “LVRT capability evaluation of DFIG based wind energy conversion system under type-A and type-C grid voltage sags,” 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE2020). IEEE, pp. 1–6, 2020, doi: 10.1109/PESGRE45664.2020.9070540.

T. Thomas, A. Prince, "An enhanced low voltage ride-through of DFIG based WECS during unbalanced type-B and type-E voltage dips," 2020 Power Engineering Research Summit (PERS-2020), SREC Coimbatore, 29 February 2020.

K. M. K and D. M. Abraham, “PWM-Based Sliding Mode Current Controller for Bidirectional DC-DC Converters in Electric Vehicles,” 2020 International Conference on Power, Instrumentation, Control and Computing (PICC). IEEE, pp. 1–6, 2020, doi: 10.1109/PICC51425.2020.9362431.

M. Khalid, A. Mohan, and A. C. Binojkumar, “Performance Analysis of Vector controlled PMSM Drive modulated with Sinusoidal PWM and Space Vector PWM,” 2020 IEEE International Power and Renewable Energy Conference. IEEE, pp. 1–8, 2020, doi: 10.1109/IPRECON49514.2020.9315210.

International Conferences

T. Thomas and P. Asok, “Analysis and validation of low voltage ride-through capability for DFIG based wind energy conversion system under symmetrical grid voltage sags,” 2019 International Conference on Power Electronics Applications and Technology in Present Energy Scenario (PETPES). IEEE, pp. 1–6, 2019, doi: 10.1109/PETPES47060.2019.9003815.

Journal Publications

F. M. Chacko, M. V. Jayan, and A. Prince, “Load harmonics extraction based decoupled control of grid connected solar photovoltaic system,” IOP Conf. Ser. Mater. Sci. Eng., vol. 396, no. 1, p. 012049, pp.1–8, 2018, doi: 10.1088/1757-899X/396/1/012049.

T. Thomas and A. Prince, “Evolution of wind energy conversion system and recent challenges in grid integration: A review,” IOP Conf. Ser. Mater. Sci. Eng., vol. 396, no. 1, p. 012051, pp. 1-8, 2018, doi: 10.1088/1757-899X/396/1/012051.

International Conferences

G. A. George, A. Prince, and M. V. Jayan, “Modular battery charge equalization circuit based on state of charge for electric vehicle application,” IOP Conference Series: Materials Science and Engineering, vol. 396, no. 1, p. 012052, pp 1-7, 2018, doi: 10.1088/1757-899X/396/1/012052.

International Conferences

S. Shanifa Beevi and G. Vincent, “A detailed investigation of PV parameter estimation under varying climatic conditions,” 2016 International Conference on Next Generation Intelligent Systems (ICNGIS). IEEE, , pp. 1-6, 2017, doi: 10.1109/ICNGIS.2016.7854075.

B. K. Jose and G. Vincent, “Harmonic current based islanding detection for grid connected PV systems,” 2017 IEEE International Conference on Circuits and Systems (ICCS). IEEE, pp. 191–195, 2017, doi: 10.1109/ICCS1.2017.8325988.

B. K. Jose, “Grid integration of PV systems-issues and requirements,” 2017 IEEE International Conference on Circuits and Systems (ICCS). IEEE, pp. 215–219, 2017, doi: 10.1109/ICCS1.2017.8325993.

International Conferences

J. Mathew and G. Vincent, “Realtime Parameter Monitoring and Maximum power Point Estimation of Solar Photovoltaic Array,” 2016 International Conference on Next Generation Intelligent Systems (ICNGIS). IEEE, pp. 1–4, 2016, doi: 10.1109/ICNGIS.2016.7854076.

J. Mathew, S. S. Beevi, and G. Vincent, “Model based MPPT algorithm for drift-free operation in PV systems under rapidly varying climatic conditions,” 2016 7th India International Conference on Power Electronics (IICPE). IEEE, pp. 1–5, 2016, doi: 10.1109/IICPE.2016.8079520.

J. S. S. Beevi, J. Mathew, and G. Vincent, “A high performance instantaneous resistance maximum power point tracking algorithm,” 2016 7th India International Conference on Power Electronics (IICPE). IEEE, pp. 1–5, 2016, doi: 10.1109/IICPE.2016.8079523.

Civil Engineering

Journal Publications

Mini Koshy, (2021),”Reliability based design of Standing Seam Metal Roofing System” IOP Conference Series: Earth and Environmental Science Volume 796, 2021

E. K. Arya and B. S. Dhanya, “Corrosion control of reinforced concrete structures in construction industry: A review,” Proceeding of the ICETEST-2020, GEC Thrissur, 17-19 Dec 2020

Thomas, T. S., Sankaran, V., Jisha, K. V. and Dhanya, B. S. (2021). “Sustainability assessment of M25 grade recycled aggregate concrete”, The Indian Concrete Journal, Vol. 95, No. 5, pp. 51-62.

M.S. Saranya, V.N. Vinish (2021), "Evaluation and selection of CORDEX-SA datasets and bias correction methods for hydrological impact study in a humid tropical river basin, Kerala ", J. Water Clim. Change. doi: https://doi.org/10.2166/wcc.2021.139

M.S. Saranya, V.N. Vinish (2021), “Ranking of CORDEX – SA datasets for Meenachil river basin, Kerala using TOPSIS method”, International Virtual Conference on Innovative Trends in Hydrological and Environmental Systems (ITHES-2021), NIT Warangal, April 28-30, 2021.

M.S. Saranya, V.N. Vinish (2021), “Ranking of CORDEX – SA datasets for Meenachil river basin, Kerala using Multi-criteria decision making method”, International Conference on Energy and Environment (ICEE), Jyothi Engineering college, Thrissur, April 9-10, 2021.

Tilba Thomas and A. Praveen, 2021, Regulating natural resource consumption in the construction sector using emergy model, Proceedings of the ICETEST-2020, GEC Thrissur, 17-19 Dec 2020

Koshy, S.A., Praveen, A. & Ajitha, T., 2021 Resilient Modulus Prediction of Laterite Soils Under Variable Moisture Levels Using Fuzzy Logic Model. Transp. Infrastruct. Geotech. https://doi.org/10.1007/s40515-021-00173-8

B. S. Dhanya, Bino I. Koshy, Jisha K. V., Aisu Jayamohanan, and Neethu Mathew, Evaluation of the mechanical performance of M25 grade recycled aggregate concrete, Proceedings of the International conference on modelling and simulation in civil engineering, TKM College of Engineering, Kollam, pp. 120. (Paper got accepted for publication in the Earth & Environmental Science proceedings (Scopus Indexed) of the Institute of Physics (IOP) publishers, Bristol UK.)

Sneha S. S., Karthika Soman, Prajith C., Aisswarya K. Davis and Dhanya B. S., Study of the mechanical and corrosion resistance properties of concrete, Proceedings of the International conference on modelling and simulation in civil engineering, TKM College of Engineering, Kollam, pp. 119. (Paper got accepted for publication in the Earth & Environmental Science proceedings (Scopus Indexed) of the Institute of Physics (IOP) publishers, Bristol UK.)

Journal Publications

D Santhosh, BK Bindhu, BI Koshy, “Evaluation of pedestrian safety in unsignalized T and X–Intersections through comparison of the frequency and severity of pedestrian conflicts”Case studies on transport policy Volume 8, Issue 4, December 2020, Pages 1352-1359

Koshy, S.A., Praveen, A. & Ajitha, T., “Evaluation of adequacy of pavement design practice of using CBR to capture resilient responses of lateritic subgrade soil”, 13th International (Online) Conference on Transportation Planning and Implementation Methodologies for Developing Countries (TPMDC), Department of Civil Engineering, Indian Institute of Technology Bombay, 10-11 Dec 2020

Koshy, S.A., Praveen, A. & Ajitha, T., “Structural performance assessment of inundated flexible pavements with lateritic subgrade”, National Conference on Resilient Infrastructure (NCRI 2020), Kerala highway Research Institute (KHRI) in association with Indian Institute of Technology Palakkad (IIT), 16-18 Dec 2020

E. K. Arya, A. V. Ittyeipe, D. K. Kamde, and B. S. Dhanya, “Service Life of (RC) Systems with Cement-Polymer- Composite (CPC) coated steel rebars,” Indian Concr. J., vol. 94, no. November, pp. 68–80, 2020.

Simi M R, Bindhu B K, Abin Varghese. "Groundwater vulnerability assessment to pollution by DRASTIC model in a GIS environment". Proceedings of International conference on Recent Advances in Civil Engineering (ICRACE), School of Engineering, CUSAT, July15-17,2020.

M.S. Saranya, V.N. Vinish (2020), "Evaluation of reliability of Empirical models for estimating Global solar radiation", Indian National Groundwater conference (INGWC-2020), CWRDM Kozhikode, February 18-20,2020.

Thomas, T., Praveen, A., 2020. Emergy parameters for ensuring sustainable use of building materials. J. Clean. Prod. 276, 122382.

Rejivas, V. A.,Praveen, A.,Ajitha, T., Emission exposure assessment using real time traffic flow information, 5th International Conference on Modeling and Simulation in Civil Engineering (ICMSC 2019),December 2020.

Journal Publications

Sreekanth Fhulari, Ajitha Thankappan, Lelitha Vanajakshi & Shankar C. Subramanian, (2019) “Traffic flow estimation at error prone locations using dynamic traffic flow modeling”, Transportation Letters-The International Journal of Transportation Research, Volume 11, Issue 1

Dipty Sarin Isaac, Vinish V Nair, Harikumar Mohanan, 2019, ”Coir Based Hybrid Geosynthetic- A Sustainable Approach”, Proceedings of the International seminar –Coir Kerala 2019,pp 160-163

Tiju Susan Thomas, P.S. Snehalatha, B.S.Dhanya, Sunitha K. Nayar. “White toppings for repair of existing pavements: prospects and research challenges”. Proceedings of International Conference for Modeling and Simulation in Civil Engineering (ICMSC), TKM College of Engineering, Kollam, Dec 10-13, 2019

E. K. Arya and B. S. Dhanya, “Review on the corrosion of steel reinforcement in reinforced concrete structures and its mitigation through electrochemical techniques,” Proceeding of the ICMSC-2019, TKM College of Engineering, Kollam, Dec 10-13, 2019.

Paul Ben Pulliattu and B. S. Dhanya, “Re-emphasising the need for proper curing in concrete,” Proceeding of the ICMSC-2019, TKM College of Engineering, Kollam, Dec 10-13, 2019.

Vinish. V. Nair, (2019) “Influence of colloid and adsorption parameters on contaminant transport in fractured rocks - A triple continuum model”, Groundwater for Sustainable Development,8, pp 381-389,

Journal Publications

S Devika, Bino I Koshy, BK Bindhu, ”Tail Pipe Emissions of a Passenger Car on Different Driving Modes “International Journal of Engineering Research & Technology (IJERT) Vol. 7 Issue 05, May-2018, pp:582-585

Mini Koshy, Arul Jayachndran S, (2018) “Experimental and Safety Evaluation of Cold Formed Steel Standing-Seam Metal Roof Panels” Practice Periodical on Structural Design and Construction, -ASCE (International Journal) Volume 23(3) 04018011/ 1-7

Mini Koshy, Arul Jayachandran S, (2018) “Investigations on the wind uplift behaviour of standing seam cold formed steel roofing sheets” Journal of Structural Engineering Vol. 44, No. 6, pp-1-10

B. S. Dhanya, Alan Verghese Ittyeipe, Akshay Rudhan, Anjaly Ajayan, and Malavika S., Effect of surface preparation on the corrosion resistance of Cement Polymer Composite (CPC) Coated Steel Reinforcement, Proceedings of the 3rd R.N. Raikar Memorial International Conference and Gettu-Kodur International Symposium, On Advances in Science and Technology of Concrete, 14-15 December 2018, Mumbai, India, Vol. III, pp. 218 – 223.

An Rose Paul, Dhanya B. S., James Joseph, Megha S., and Namitha K., “Comparison of mechanical and durability properties of steam and normal cured concrete”, Second International Conference On Advances in Concrete, Structural & Geotechnical Engineering, BITS Pilani, Pilani, February 26 – 28, 2018

Journal Publications

1. A Santhosh, E Sam, BK Bindhu “Pedestrian Accident Prediction Modelling—A Case Study in Thiruvananthapuram City Transportation Research”, Proceedings of CTRG 2017 Lecture Notes in Civil Engineering, Volume 45; pp:637-645

Ansa Varghese, Arya Hari, Kavya Somanath, Surya Bhaskaran and B. S. Dhanya, Influence of super plasticizers on M30 grade concrete, 4th International Conference on Modeling and Simulation in Civil Engineering (ICMSC 2017), TKMCE, Kollam

B. S. Dhanya, Anujith K. Babu, Jacob Sebastian, Varsha S. Kumar and Smruthi P. Nair, Performance evaluation of concrete made of recycled fine aggregates from different exposure conditions, 71st RILEM Week & ICACMS 2017, International Conference on Advances in Construction Materials and Systems, Chennai, India, 3 – 8 September 2017.

B. S. Dhanya, M. Santhanam, V. Kulkarni, P. Nanthagoplan, S. Bishnoi, S. P. Singh, G. Indu Sivaranjani, P. Dinakar and S. Bhaskar, (2017) “Round robin testing of durability parameters – Towards identification of suitable durability tests for concrete”, The Indian concrete Journal, Vol. 91, Issue 7, pp. 11-22.

Journal Publications

Ajitha Thankappan, Lelitha Vanajakshi and Sankar C. Subramanian, (2015) “Real-Time Traffic Density Estimation without Reliable Side Road Data”, ASCE Journal of Computing in Civil Engineering, Vpl.29, Issue 2

Ajitha Thankappan and Lelitha Vanajakshi, (2015) “Development and Application of a Traffic Stream Model Under Heterogeneous Traffic Conditions”, Journal of Institution of Engineers India Ser. A, 96, DOI 10.1007/s40030-015-0134.

Journal Publications

Ajitha Thankappan, Lelitha Vanajakshi and Sankar C. Subramanian, (2014)” Significance of incorporating heterogeneity in a non-continuum macroscopic model for density estimation”, Transport (Taylor & Francis), Vol. 29, No. 2, pp. 125-136

Journal Publications

Ajitha Thankappan and Lelitha Vanajakshi, (2013)"A traffic stream model for heterogeneous traffic conditions", Transport (Journal of Institution of Civil Engineers UK), 166,

Ajitha Thankappan, Lelitha Vanajakshi and Sankar C. Subramanian, “A hybrid model for arterial traffic density estimation”. Proceedings of the 92nd Transportation Research Board Annual Meeting, Washington, D. C., 2013.

Journal Publications

Vinish. V. Nair, Santosh. G. Thampi, (2012) “Numerical modelling of contaminant transport in sets of parallel fractures with fracture skin”, Journal of Porous Media, 15(1), pp.95‐100.

Vinish. V. Nair, Santosh. G. Thampi, (2012) “A triple continuum transport model for colloid migration in fractured formations, KSCE Journal of Civil Engg., 16(3), pp.293‐297.

Ajitha Thankappan, Lelitha Vanajakshi and Sankar C. Subramanian, (2012) “A Multi-class non-continuum traffic flow model for congestion analysis", International Journal of Engineering Studies, Vol. 4, No. 2

Ajitha Thankappan and Lelitha Vanajakshi, “Development of optimized traffic stream models under heterogeneous traffic conditions”, Proceedings of the 91st Transportation Research Board Annual Meeting, Washington, D. C., 2012.

Journal Publications

Ajitha Thankappan, Lelitha Vanajakshi and Sankar C. Subramanian “An optimal traffic stream model for Indian traffic conditions”, Proceedings of the 90th Transportation Research Board (TRB) Annual Meeting, Washington, D. C., January 23-27, 2011.

Vinish. V. Nair, Santosh. G. Thampi, (2011) “A triple continuum one-dimensional transport model for colloid facilitated contaminant migration in sets of parallel fractures with fracture skin”, Colloids and Surfaces A: Physicochemical and Engineering Aspects:373, pp.74‐81

Journal Publications

Vinish V. Nair, Santosh G. Thampi, (2010) “Numerical modelling of colloid transport in sets of parallel fractures with fracture skin” Colloids and Surfaces A: Physicochemical and Engineering Aspects:364, pp. 109‐115,2010

Ajitha Thankappan and Lelitha Vanajakshi, “Traffic stream modeling under heterogeneous traffic conditions”, International Conference on Traffic and Transportation Studies (ICTTS-10), Kuming, China, August 3-5, 2010.

Mechanical Engineering

#	#	#	#
1	Quantitative Models in Railway Operations Management	Swapnesh S	In Book Quantitative Methods for Decision Making, Springer, 2021 (Accepted).
2	QuOptimizing large scale upgradations involving movable assets	Swapnesh S	Submitted to OPSEARCH, Journal of Operational Research Society of India, 2021
3	A dynamic sampling approach towards computing Voronoi diagram of a set of circles	Prof. Manojkumar	Computer Aided Geometric Design, Volume 90, October 2021, Elsevier 102023
4	Modelling and simulation of SISO model prosthetic limb by Open Modelica an acausal and cyber physical modelling language	Madhukumar T K	IOP Conference Series: Materials Science and Engineering, Volume 1114, Issue 1, Pages 012096, 2021/3/1
5	Study and Analysis of Supplier selection by Using AHP in Chennai Automobile Sector.	Dr. Jinesh N	International Journal of Engineering Research & Technology (IJERT) , 10(2),1-6 (2021).
6	Parametric Analysis and structural optimization of a mini crane	Dr. Jinesh N	International Journal of Engineering Research & Technology (IJERT) , 8(6),1-12 (2021).
7	Design and Modelling of height-adjustable grab holder	Dr. Jinesh N	International Journal of Engineering Research & Technology (IJERT) , 8(8),1-5 (2021).
8	Analysis of Job Stress of Medical Personnel during Covid-19 Work Life	Ciby Thomas	International Journal of All Research Education & Scientific Methods, Volume 9, Issue 8 , pp- 118-125, August - 2021
9	Capacity Management Issues of a Food Manufacturing Industry,	Rajesh R.	National Conference on Advancements in Engineering and Computing, ICET Mulavoor, June 2021.
10	Modeling and Simulation of Planar 3R Manipulator using Open Modelica an Acausal and Cyber Physical Modeling Language	Madhukumar T K	National Conference on FUTURISTIC ADVANCEMENT IN MECHANICAL AND CIVIL ENGINEERING (FAMCE 2021) , Dept. of ME, College of Thalssery, 31st Aug - 1st Sept, 2021

#	#	#	#
1	TQM implementation practices and performance outcome of Indian hospitals: exploratory findings	Biju Augustine	The TQM Journal, 8 December 2020, DOI 10.1108/TQM-07-2020-0171
2	Effect of TQM on the performance of Indian Hospitals	Biju Augustine	National Conference on Technological Advancements in Materials and Manufacturing in Industrial Environment, (TAMMIE 2020), 13th and 14th March 2020
3	Influence of TQM on organizational performance of construction industry	Biju Augustine	Computer Aided Geometric Design, Volume 90, October 2021, Elsevier 102023
4	Charactrization of the Small Paper craft retailer’s perceptions of success and the factors affecting success	Biju Augustine	2nd National Conference on the Advances in Mechanical Engineering , (NCAME 2020), MBC College of Engineering, Peerumedu, 5/5/2020
5	Impact of TQM on quality performance of Indian hospitals.	Biju Augustine	2nd National Conference on the Advances in Mechanical Engineering, (NCAME 2020), MBC College of Engineering, Peerumedu, 5/5/2020
6	EMD analysis on the impact of temperature, volume fraction and molecular weight on the thermal conductivity of water-based nanofluids	Prof. Ramesh Krishnan S	J Therm Anal Calorim Springer (2020)
7	High specific strength steel as an alternative material for heavy vehicle chassis – an explicit analysis	Prof. Ramesh Krishnan S	IOP Conference Series: Materials Science and Engineering, Volume 1114, 2020.
8	Reduction of defects in steel industry	Dr. Ciby Thomas	National Conference on Advances in Mechanical Engineering, Mar Baselios Christian College of Engineering and Technology, Idukki, (NCAME 20)5th May 2020
9	Consumer Behaviour and Brand Loyalty of Packaged Milk in Kottayam district	Dr. Ciby Thomas	Second National Conference on Advances in Mechanical Engineering (NCAME 20) 05 May 2020
10	Study on the Effect of Engineering Change Management in the Supply Chain of Aerospace Valves	Dr. Ciby Thomas	National Conference on Technological Advancements in Materials and Manufacturing in Industrial Environment, (TAMMIE 2020), 13th and 14th March 2020
11	An Analytic Study on Biomedical Waste Management in Hospital located in Trivandrum	Dr. Ciby Thomas	National Conference on Technological Advancements in Materials and Manufacturing for Industrial Environment TAMMIE 2020
12	Interrelationship among the Critical Factors of Work Flow Reliability in Construction Projects	Dr. Deepak Cheriyan	Second National Conference on Advances in Mechanical Engineering (NCAME 20) 05 May 2020
13	A Study on the Factors Affecting Critical Factors of Work Flow Reliability in Construction Basis	Dr. Deepak Cheriyan	National Conference on Technological Advancements in Materials and Manufacturing in Industrial Environment, (TAMMIE 2020)
14	An Analysis of the Supplier Selection Process in Chennai Automobile Sector	Dr. Jinesh N	Second National Conference on Advances in Mechanical Engineering (NCAME 20), 05 May 2020 in Mar Baselius Christian college of Engineering & Technology
15	An Analysis of the Supplier Selection Process in Chennai Automobile Sector	Dr. Jinesh N	Second National Conference on Advances in Mechanical Engineering (NCAME 20) 05 May 2020
16	Selection Of Supplier Based On Selection Attributes by Using AHP in Chennai Automobile Sector	Dr. Jinesh N	National Conference on Technological Advancements in Materials and Manufacturing for Industrial Environment TAMMIE 2020
17	Causes and Effects of Rework in Construction Projects	Dr. Renju Kurian	Second National Conference on Advances in Mechanical Engineering (NCAME 20) 05 May 2020
18	Causes and Effects of Rework in Construction Projects	Dr. Renju Kurian	Second National Conference on Advances in Mechanical Engineering (NCAME 20) 05 May 2020
19	Occupational Health and Safety in Medical Laboratories in Kottayam	Prof. Sajumon K.T.	International Conference on Vission 2020: Competing in a World of Sectors Without Borders
20	Lean Productivity Enhancement Through Line Balancing In Tiller Manufacturing Unit	Rajesh R.	Technological Advancements in Materials and Manufacturing for Industrial Environment, 13-14 March 2020, KPR Institute of Engineering & Technology, Coimbatore.
21	Study on Influence of Factors in Time Overrun of Construction Project. Technological Advancements in Materials and Manufacturing for Industrial Environment	Rajesh R.	Technological Advancements in Materials and Manufacturing for Industrial Environment, 13-14 March 2020, KPR Institute of Engineering & Technology, Coimbatore.
22	Study of Green Supply Chain Management in Chemical Industry. Technological Advancements in Materials and Manufacturing for Industrial Environment	Rajesh R.	Technological Advancements in Materials and Manufacturing for Industrial Environment, 13-14 March 2020, KPR Institute of Engineering & Technology, Coimbatore.
23	Investigation of Friction Stir welding on AA6061 using Taguchi method	Sabu KT	3rd International Conference on Interdisciplinary Research (ICIR-2020) which was held at Thiruvananthapuram on 17/07/2020 & 18/07/2020
24	Modelling and simulation of SISO model prosthetic limb by Open Modelica an acausal and cyber physical modelling language	Madhukumar T K	ICETEST 2020 - RAMPTS 2020 December 17 - 19, 2020 GEC Thrissur

#	#	#	#
1	Computational Fluid Dynamics Simulation on Particulate Distribution in Gyro Casting for the Manufacture of Al/SiC Particulate Metal Matrix Composite	Ramesh A	Journal of Applied Fluid Mechanics, Vol. 12, No. 5, pp. 1585-1597, 2019
2	Microstructural evolution and microhardness response of H11 hot forging dies	Ramesh A	World Journal of Engineering ISSN: 1708-5284 Publication date: 19 August 2019
3	Influence of loading conditions on wear behaviour of H11 tool steel	Ramesh A	World Journal of Engineering ISSN: 1708-5284Publication date: 5 September 2019
4	Optimum fluid layer thickness for heat transfer effectiveness using water‐based nanofluids—A numerical estimation	Prof. Ramesh Krishnan S	Heat Transfer—Asian Res. Wiley 48 (8), 2019, 3945-3967.
5	Sub Structural parameter identification using One Dimensional PZT patch model with crack.	Dr. Jinesh N	International Journal for Computational Methods in Engineering Science and Mechanics, (Accepted-2019).
6	Nanocellulose-based aerogels for industrial applications	Sabu KT	Published in Industrial Applications of Nanomaterials Micro and Nano Technologies 2019, Pages 403-421. https://doi.org/10.1016/B978-0-12-815749-7.00014-1
7	Work Study at a Central Products Diary	Prof. R. Rajesh	International Journal of Advance Engineering and Research Development May 2019 ,vol 6.
8	Analysis of Barriers in Implementation of Omni Channel Strategy	Prof. R. Rajesh	International Journal of Advance Engineering and Research Development May 2019 ,vol 6.
9	Effect of standardization on rake utilization in rolling stock	Swapnesh S	presented in 30th European Conference on Operational Research (EURO 2019), June 23 - 26 2019, Dublin, Ireland
10	Developing An She Performance Model In Construction Industry Kerala	Dr. Renju Kurian	1st International Conference on Emerging Trends in Engineering and Technology (ICETET - 2019), 29 & 30 May 2019, pp 344-350
11	Innovative visual learning system developed using visual - PYTHON AND WX - PYTHON programme for mechanical engineering	Madhukumar T K	30th Annual State Faculty Convention and National Seminar at JDT Islam Polytechnic College, Kozhikode, 07/12/2019
12	Feasibility Study for Preparedness of Organisation in Lean Green Six Sigma Intiative	Dr.Sajan M.P	American International Journal of Research in Science ,Technology, Engineering and Mathematics ,ICETET-2019,May 29-30,351-356.
13	Flood preparedness for better response logistic perspective	Dr.Sajan M P	International Conference on Emerging Trends in Engineering and Technology May 2019
14	Increasing Productivity and efficiency of Workers in a Small Scale Industry	Prof. Ajith P M	Kerala Technological Congress 2019 Government Engineering College Thrissur, Kerala.
15	Enhancing Productivity by standardization of operations in a small scale industry	Ajith P M, G Venugopal	National Conference on Advances in Mechanical Engineering, Mar Baselios Christian College of Engineering and Technology, Idukki, (NCAME 19)
16	Analysis of Liquidity and Profitability Position of a Tyre tread Company in Kottayam Kerala	Dr.Ciby Thomas	KETCON 2019

#	#	#	#
1	Analyzing the problem of small retailers in cashless transactions	Swapnesh S	Journal of Computer and Mathematical Sciences, ISSN 2347-8527, volume 7, issue 1, Jan 2018
2	Effectiveness of Classroom Interactions in Engineering Colleges	>Swapnesh S	In: Ray P., Maiti J. (eds) Ergonomic Design of Products and Worksystems - 21st Century Perspectives of Asia. Managing the Asian Century. Springer, Singapore, 2018
3	Optimizing large scale upgradations involving movable assets	Swapnesh S	51st Annual Convention of Operational Research Society of India & International Conference (ORSI 2018), Mumbai 16-19 December 2018
4	Numerical simulation of heat transfer in metal foams	Dr. Renju Kurian	Heat Mass Transfer (2018) 54:553–562
5	Formulation of marketing strategy for an automobile firm by multi-criteria decision making tool.	R Rajesh	International Journal of Markets and Business Systems. 2018, 4(3), 362-373.
6	The usability of road traffic signboards in Kottayam.	R Rajesh	In R. Vanchipura & K.S. Jiji (Eds), in Emerging Trends in Engineering, Science and Technology for Society, Energy and Environment (pp.323-328). Taylor & Francis, London, 2018, ISBN 978-0-8153-5760-5
7	Solid waste management practices and decision-making in India.	Prof. R. Rajesh	In R. Vanchipura & K.S. Jiji (Eds), in Emerging Trends in Engineering, Science and Technology for Society, Energy and Environment (pp.205-211). Taylor & Francis, London, 2018, ISBN 978-0-8153-5760-5
8	Decision Tree for Manual Material Handling Tasks Using WEKA	Prof. R. Rajesh	In: Ray P., Maiti J. (eds) Ergonomic Design of Products and Worksystems - 21st Century Perspectives of Asia. Managing the Asian Century. Springer, Singapore. 2018.
9	Effectiveness of Classroom Interactions in Engineering Colleges	Prof. R. Rajesh	In: Ray P., Maiti J. (eds) Ergonomic Design of Products and Worksystems - 21st Century Perspectives of Asia. Managing the Asian Century. Springer, Singapore, 2018
10	Modelling the Perception Towards In-Vehicle Distracted Driving Among Four-Wheeler Drivers in Kerala	Prof. R. Rajesh	In: Maiti J., Ray P. (eds) Industrial Safety Management. Managing the Asian Century. Springer, Singapore. 2018.
11	Multiple crack Identification using simplified PZT Model	Dr. Jinesh N	Journal of Mechanics of Materials and Structures, 13(2), 225-246 (2018).
12	Impact of smart phone usage on academic performance of college going students.	Dr. Jinesh N	International Journal of Advance Engineering and Research Development, 5(5),1-6 (2018).
13	A New Methodology For Improving the Supplier Selection Process in a Casting unit	Dr. Jinesh N	National conference on Technological advance-ments in engineering (NACTAE 18), March-18 2018 in Sree Narayana Guru College of Engineering and Technology, Payyannur, Kerala.
14	A Study on Impact of Smart Phone Usage on Health of College Going Students	Dr. Jinesh N	International Conference on Innovative Research in Engineering, Science, Management and Humanities (ICIRESMH-2018), 18 March 2018 in Telungana.
15	Numerical Analysis of Homogeneous Methanol-Air System Explosion Characteristics using Reduced Reaction Mechanism in a Constant Volume Reactor	Madhukumar T K	7 th Asian Joint Workshops on Thermophysics and Fluid Science- AJWTF7, 21/11/2018 to 24/11/2018, Mascot Hotel Trivandrum.
16	Construction Schedule Management based on BIM Technology	Prof.Pradeep Kumar	Third International Conference on Advances in Industrial Engineering Applications, ICAIEA 2018,111-134.

#	#	#	#
1	Lean manufacturing practices in Indian manufacturing SMEs and their effect on sustainability performance	Biju Augustine	Journal of Manufacturing Technology Management, 2017, Vol. 28 Issue: 6, pp.772-793, https://doi.org/10.1108/JMTM-12-2016-0188
2	Lean manufacturing practices in Indian manufacturing SMEs and their effect on sustainability performance	Ramesh A	Journal of Manufacturing Technology Management, 2017, Vol. 28 Issue: 6, pp.772-793, https://doi.org/10.1108/JMTM-12-2016-0188
3	Estimation of Structural Parameters in Time Domain Using One Dimensional Piezo Zirconium Titanium Patch Model	Dr. Jinesh N	World Academy of Science, Engineering and Technology International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering,11(1)2017
4	Identification of structural parameters including crack using one dimensional PZT patch model.	Dr. Jinesh N	Inverse Problems in Science and Engineering, 25(8), 1216-1241, (2017).
5	Damage identification using combined acceleration and voltage matching with one dimensional PZT Patch model.	Dr. Jinesh N	Multidiscipline Modeling in Materials and Structures, 14(1), 40-64 (2017).
6	Estimation of Structural parameters in time domain using one dimensional PZT patch model	Dr. Jinesh N	19th International Conference on Inverse Problems in Science and Engineering (ICIPSE 2017)19-20, January 2017 London, United Kingdom.
7	Particle Swarm Based Crack detection in Structure using One Dimensional PZT Patch Model	Dr. Jinesh N	19th International Conference on Emerging Technology In Structural Engineering (ICETSE 2017) 17-18, March 2017 Nagpur, India.
8	Analytical Solution for the Computer- Aided Kinematic Analysis of Planar Mechanism using Velocity and Acceleration Polygon	Madhukumar T K	Kerala Technological Congress (KETCON), 13/01/2017 to 14/01/2017, Mar Athanasius College of Engineering, Kothamangalam, Kerala.
9	Prediction of vapor heat capacity of the biodiesel blends for the combustion modeling	Madhukumar T K	Proceedings of the 24 th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017)

#	#	#	#
1	Structural Parameter Estimation Including Crack Using Combined Acceleration and Voltage matching with One Dimensional PZT Patch Model.	Dr. Jinesh N	Non-Destructive Evaluation,94,360-366,(2016).
2	Structural Parameter Estimation including crack using combined Acceleration and Voltage matching with One Dimensional PZT Patch Model.	>Dr. Jinesh N	26th National and International exhibition on Non destructive Evaluation (NDE 2016) 15-17, December 2016 in Thiruvananthapuram, India.